Bottle Sampler with Clamp

Bottle Sampler with Clamp

The Bottle Sampler has been specially designed for taking running and TOP samples.

The sampler consists of a half open cylinder around the bottle, and a spring-clamp to Click in your sampling bottles. The sampler is a Hartwig Instruments quality product, with life time warranty. 

Operations:

• TOP Sample: Click a open sample bottle in the spring-clamps which hold on to the bottle firmly. The bottle sampler is now ready to take the sample. The bottle sampler is lowered into the liquid from which the samples are required using a chain or a rope (100% cotton!). When down the sampler
  this will start to fill up at the top of the tank
  
  
• Running sample: Click in a sampling bottle with cap that has a hole in it with a required diameter in to the spring-clamp which hold on to the bottle firmly. The bottle sampler is now ready to take the sample.
  Lower the bottle sampler with high speed to the required depth and pull up with high speed. The bottle should be filled for about 75-90% to ensure a good runningsample. 
  When sampling low viscosity liquids narrow down the opening of the cap , When sampling high viscosity liquids expend the opening of the cap 

Specifications:

• Model F391B (250ml)
  Outside diamter:76.5mm
  Total Height: 240mm
  Max bottle diameter:70mm
  Weight:1,0KG
  
  
• Model F394B (1000ml)
  Outside diamter: 101.5mm
  Total Height: 340m
  Max bottle diameter: 98mm
  Weight:2,0KG